Teaching an old dog new tricks
At the end of the Great War, the Germans had zillions of helmets lying around that were pressed into service for the various post-war paramilitary units, as well as the Reichwehr - the German army of the interwar years. As Hitler took power and the German violations of the Versailles treaty continued to ramp-up, the Krauts put rearmament into high-gear, including the production of a new combat helmet - the m.35.
But production couldn't keep up with demand, so as an expedient, tens of thousands of m.18 helmets from the previous war were pressed into service with the new m.31 liner installed, with it's ergonomic leather suspension and integral chinstrap.
The use of the "transitional helmet" was widespread in the years prior to the Second World War and then, throughout the war itself. Although the transitionals were replaced with the m.35, m.40. and m.42 as the years went by, many soldiered on through the whole war, if not with frontline troops, but as a Volkssturm helmet...those were the last-ditch boys and old men who were throwing bricks at the Soviet tanks which were trying to find parking in a smoldering Berlin.
You don't see these often on the trading market, as most of them were melted-down after the war and turned into US college kid's Volkswagens or Rachael Ray's Solingen kitchen knives... Hey, does this "Holy Smoky!" Red Pozole smell like defeat, or is it just me?
I was very happy to get this helmet recently, as it filled an important gap in my German helmet family - the missing link between the Great War and WWII. Currently I'm waiting on the delivery of a German m.92, and with that I will have the whole 20th century family, from pickelhaube to composite...sounds like the grist for a book, doesn't it?
This helmet is a welcome addition to the collection and I am very happy to share it with you.
One can determine that this is an m.18 by the lack of a rivet on the side of the skirt, which, in the m.16 and m.17 helmets, fastened the chinstrap lugs inside the skirt.
Here's the "money shot", the thing that made it a transitional helmet. The m.16, 17, and 18 helmets of the Great War were fitted with the new m.31 liner and pressed into service with the Reichswehr, the SS, and the Wehrmacht while the m.35 was still on the drawing board.
I'm not sure if the Germans actually had "m.18" as official nomenclature. I've read on the various forums that it is a term assigned by collectors. I don't know if this is true, but it bears some investigation.
The seller, in a fit of wishful-thinking hinted that he could see the faintest traces of a decal under the thick paint. Under magnification... well I'll be, I think he was right.
There is a notable crack in the skirt. One wonders how it got there.
The helmet has a very thick overpaint of fieldgray.
There are three different sizes of ventilation lugs, depending on the size of the helmet. This is the small un-stepped version.
This is the rear split-pin, one of three, that secures the liner inside the helmet. This also shows the coarse, thick, overpaint of fieldgray paint. The paint is thick enough to completely cover any size or makers markers that appear inside the skirt of the helmet.
The crack in the skirt.
It is quite likely that there are decals beneath this overpaint. A common mistake among inexperienced collectors is that they go "digging out" the decals. This makes a mess, damages the helmet, and decreases the monetary value of the helmet...if that's important to you.
The m.31 liner is completely intact, including the original drawstring, though the leather is very dry.
The manufacturer's mark is on the very end of the chinstrap -
this one is dated 1938.
As with all of these transitionals, the fit of the band to the shell is extremely tight, preventing one from getting a peek at the date of manufacture.
Now for the usual action shots.
This happy hun has no inkling what 1946 is going to look like.
SS creeps at inspection.
Not the sort of face you'd see on a Kraut recruiting poster.
A nice simultaneous-service shot.
Poindexter puzzling over why he couldn't get one of the newer helmets.
From the wealth of photos available, one can see that the transitional was in widespread use in the Reichswehr, the German army and the SS.
Even the m.18 ear cut-out was recycled with the new liner.
Another nice mix of helmets. Don't worry, Frenchie, every dog will have his day.






German M.18 transitional steel helmet
Germany · First World War shell pattern · Interwar or later M.31 liner configuration
Specifications
| Feature | Description |
|---|
| Designation | M.18 transitional is collector shorthand for the older shell in a later service configuration. Innenausstattung 31, or M.31, is the documented designation for the liner referred to here as M.32. [1–3] |
| Shell | Pressed steel with a projecting visor, deep skirt and two prominent side ventilator lugs. The standard M.18 shell lacks the separate low skirt rivets used for the M.16 and M.17 shell-mounted chinstrap posts. [1, 4] |
| Original interior | Three-pad leather liner. The M.18 moved the chinstrap attachment from the shell to the liner assembly. The shell pattern and the later M.31 fitting therefore represent separate stages of development. [1, 2, 4] |
| Replacement interior | The M.31 uses a continuous leather headband with drawstring-adjusted tongues, supported by nested metal bands. Three split pins secure the assembly to the shell, two forward and one at the rear. Early aluminium and later reinforced aluminium and steel variants are documented. [1–3] |
| Chinstrap | On the M.31 assembly, the leather strap attaches to loops on the liner band. The prominent exterior vent lugs are distinct from the earlier shell-mounted chinstrap fittings. [2–4] |
| Size and weight | A liner stamped 57 denotes a nominal head circumference of approximately 22.4 in, where that marking is present. Record shell and liner markings separately. The specimen’s size and complete weight remain unverified, and no official weight for the converted configuration was located. [2, 3] |
| Finish on featured specimen | Heavy grey-green overpaint and a visible skirt crack. The surviving finish and liner configuration can be described directly. Any obscured decal or unit attribution remains uncertain. [1] |
Historical narrative
The M.18 was a late First World War development of the German Stahlhelm. Its deep skirt and projecting side vents retained the shape familiar from the M.16 and M.17. A useful way to distinguish the M.18 is to look low on the sides for the absence of the earlier chinstrap-post rivets. Germany retained older shells in Reichswehr service, and Forum Historicum dates introduction of the Innenausstattung 31 to 1931. That date refers to the liner pattern. The date of any particular shell’s conversion requires separate evidence. [1, 3, 4]
Fitting the M.31 placed a later suspension and chinstrap assembly inside the older steel shell. Collectors call this combination transitional. The term describes the configuration, and similar reissued shells remained in use in the Wehrmacht era alongside newer helmet patterns. The Deutschlandmuseum catalogues an M.18 in Wehrmacht service, and dated liner photographs in German Helmet Vault show why it is worth recording the liner separately. For this entries example, the three split pins, the absence of low chinstrap-post rivets and the grey-green overpaint are useful catalogue details. I could not verify the conversion date or a service attribution for that particular helmet. [1–4]
Sources
- Firsthand specimen account. Mannie Gentile, Combat Helmets of the 20th Century, November 2026 archive. Photographs and observations of the M.18 transitional helmet, including liner fittings and skirt damage.
- Specialist reference and specimen photographs. German Helmet Vault, M31 helmet liners. Examples of liner bands, marks and the use of M.31 assemblies in older shells.
- Secondary historical reference. Forum Historicum, Pickelhaube und Stahlhelm, section on the Reichswehr period. Gives the 1931 introduction date and describes the early liner construction. An original adoption order was not located.
- Museum object record. Deutschlandmuseum, Wehrmachtshelm M18. Documents the museum’s Wehrmacht-era M.18 and provides context for the shell pattern.
I hope you enjoyed this entry, and I'll see you next time with another cool helmet from the collection.Mannie
No comments:
Post a Comment